yards to feet calculator
Convert yards to feet, inches, and meters instantly. Formula, worked example, and a quick reference table for fencing and landscaping.
Yards show up on fencing rolls, fabric bolts, and some landscaping material specs, while most site measurements and floor plans are recorded in feet. This calculator converts a yard length into feet, inches, and meters so you can line up a supplier’s unit with your tape measure.
How this calculator works
A yard is defined as exactly 3 feet, and 3 feet is exactly 36 inches — both are fixed ratios, not approximations.
Formula: Feet = Yards × 3. Inches = Yards × 36. Meters = Yards × 0.9144.
Worked example
Enter 10 yards, the calculator’s default:
- Feet: 10 × 3 = 30.0 ft
- Inches: 10 × 36 = 360 in
- Meters: 10 × 0.9144 = 9.14 m
That’s a typical length for a run of privacy fencing along a side yard.
Reference
| Yards | Feet | Inches | Meters |
|---|---|---|---|
| 5 yd | 15 ft | 180 in | 4.57 m |
| 10 yd | 30 ft | 360 in | 9.14 m |
| 25 yd | 75 ft | 900 in | 22.86 m |
| 50 yd | 150 ft | 1,800 in | 45.72 m |
Where this conversion is used
Chain-link fencing, landscape fabric, and some rope or cable products are sold by the linear yard, but you’ll almost always measure the actual run with a tape measure marked in feet and inches. Converting the supplier’s yard length to feet lets you confirm you’re ordering the right amount before checkout. For the reverse direction — starting from a feet measurement and finding yards — use the Feet to Yards Calculator, or drop straight to inches with the Feet to Inches Calculator.
Frequently asked questions
How many feet are in a yard?
Exactly 3 feet. A yard was historically defined as the length of a stride, later standardized to 3 feet or 36 inches, and it remains a fixed, exact conversion — no rounding involved.
Why do fencing and landscaping jobs use yards?
Fabric, fencing rolls, and some landscaping materials are sold by the linear yard, but tape measures and framing plans are marked in feet. Converting lets you match a supplier's yard-based quantity to a feet-based site measurement.
How do I convert yards to inches directly?
Multiply yards by 36 (since 1 yard = 3 feet = 36 inches). This calculator shows the inches figure alongside feet and meters for exactly that reason.
What's the metric equivalent of a yard?
1 yard = 0.9144 meters exactly, by international agreement since 1959. This makes yard-to-meter conversions precise rather than approximate.
How do I convert feet back to yards?
Divide feet by 3. Our Feet to Yards Calculator does this conversion directly if you're starting from a feet measurement.
Estimates only. Verify quantities with your supplier before purchasing.